A "best in the nation" program requires best in the world training equipment from VAL-TEC.

   877-244-3769 (toll-free)   val-tec@val-tec.com                                                 .Bio Fuels                                 VAL-TEC, LLC.

Home
Justin's Jesus
Control&Instrumentation
1750 1760 Transducers
Microprocessors
Hydrid Vehicle Systems
Cutaways
F1 in Schools CNC
Interactive Whiteboard
Science
Virtual Reality
Student Response System
Sustainable Energy
ECO STEM
Green Construction
STEM
SCORM
Custom Furniture
RFID
CNC
Reverse Engineering
Automotive
Truck & Diesel
Military Training
Autotronics
Distance Learning
Life Science
VoIP
Wind Energy
Solar
Solar Tracker
Sustainable Technology
Bio Fuels
Oil Extractor Press
Green Technology
Fuel Cell
PLC Trainers
Transducers
Mechanical Engineering
HVAC-R
Pre-Engineering
Elementary Education
Academic Support
Fluid Power
Instrumentation
Electronics
Nuclear Engineering
Computers & IT
Computer Forensics
Graphics & Media
Wind Cutaways
Newsletter
Grants

HAMPDEN WILL TAKE YOU INTO THE FUTURE

Congratulations to Northeast Community College in Norfolk, NE and Ellsworth Community College in Iowa Falls, IA for being first in the Upper Midwest to order this Ethanol Bioprocess Training System

This system, in combination with the Hampden H-6155-TT Table Top Liquid-To-Liquid Extraction Demonstrator and LabView Data Acquisition Package that they ordered, indicates their commitment to developing a true Renewable Energies program.  VAL-TEC thanks them for their vision and foresight.

WITH THE BIO DIESEL DEMONSTRATOR

The Hampden

Model H-BIO-100 Bio

Diesel Demonstrator

is ideal for the small

producer using the same protocol and

with the same quality construction as the

larger units. Bio Diesel units are chosen

for their rugged design, ease of use, no

wash process protocol and price/capacity

ratio. The H-BIO-100 is capable of producing

up to 26.5 gallons per batch with

High Temperature Pressurized Process

(HTP) which consistently delivers 98% or

better conversion ratios. Proper use of

the unit and HTP delivers ASTM and EN

compliant Biodiesel, without the need to

wash.

 

NEW!  -  Type M-70 Oil Extractor Press

     Call 877-244-3769 for Special Introductory Price!

Oil Production:

0.8 – 2.5 Gallon/hour

Power:

220 Volt, 1 phase

Weight:

150 lbs

Seed Consumption:

35 - 50lbs Seed/hour

Soybeans, Sunflower, Camelina, Flax, Canola, Cotton Seed, Jojoba, Almond Nut, Pumpkin, Castor Bean, Coffee Bean, Jathropha, and any other oil seed can be processed.

Cold Press

The M-70 Oil Extractor Press is a precision cold screw press. It is engineered to mechanically extract the most possible oil without producing high temperatures. The oil and meal under normal operation does not exceed 130°F (54°C). Typical oil extraction efficiencies run 82% to as high as 90% oil extraction. Because of the low temperature extraction PreHeater Commodity Heater fits into oil press inlet for heating feed stock prior to pressing.  Centrifuge Oil Cleaner, polishes oil down to as low as .01 of a Micron.  The nutrition in the oil and press meal is perfectly preserved.

Quantities

The M-70 oil press will produce 50 to 70 gallons (190 to 260 Liters) of cold pressed oil per day running 24 hrs from oil seed crops and nuts. The press will process 700 to 1500 lbs (320 to 680 Kilograms) of oil seed or nuts per day providing 450 to 900 lbs (200 to 400 Kilograms) of high protein, high nutrition low fat press meal.

Soybeans typically contain 18% oil by volume. Because of the low oil content in soybeans, you will get 15 to 20 gallons (56 to 75 Liters) of oil and 600 to 800 lbs (270 to 360 Kilograms) of high protein press meal per day running 24 hours.

If you are seeking greater processing volumes, we simply line them up in a row, as many as needed, to produce your achievements. Much like an engine, which is better, one large piston/cylinder or several pistons/cylinders?

Continuous Operation

The M-70 Oil Extractor Press is engineered to be set up and ran continuously 24 hours a day without any other intervention. As long as clean commodity is automatically feeding to the press, the machine will run without cease.

The press requires 240V single phase input and draws only 4-6 amps under normal operation. Three phase power can also be used to power the press if it is available.

The press motor has a variable speed controller to accurately set the rate at which the press runs. The slower you run the machine, the more oil will be extracted.

Options:

CP-4 Commodity Cleaner, 4 port: All Stainless Steel Seed Cleaner, Hopper, Chassis .00

Control Panel for up to 4 M-70 Oil Presses

 

Parts & Accessories

CP-4SD Screen drawer for seed cleaner .00

CP-GS 110V Grain Switch mounts in bin to automate auger on/off

MCTR Meal Cutter, gear motor with propeller blade

 

 

 

 

 

 

 

 

 

 

 

 

 

Duane Brindle - BioFuels

 

Advanced Learning Solutions

Duane Brindle       *       VAL-TEC, LLC       *       877-244-3769 (toll free)         *           fax: 866-597-1101 (toll free)  Locations of visitors to this page

        Send mail to val-tec@val-tec.com  with questions or comments about this web site.