A "best in the nation" program requires best in the world training equipment from VAL-TEC.

   877-244-3769 (toll-free)   val-tec@val-tec.com                                                 .Oil Extractor Press                                 VAL-TEC, LLC.

       Type Model 70 Oil Extractor Press

Soybeans, Sunflower, Camelina, Flax, Canola, Cotton Seed, Peanut, Linseed, Jojoba, Almond Nut, Pumpkin, Castor Bean,

Mustard Seed, Sesame Seed, Poppy Seed, Coffee Bean, Jathropha, and any other oil seed can be processed.

Produce up to 110 gal./acre.

Cold Press

The Model 70 Oil Extractor Press is a precision cold screw press. It is engineered to mechanically extract the most possible oil without producing high temperatures. The oil and meal under normal operation does not exceed 130°F (54°C). Typical oil extraction efficiencies run 82% to as high as 90% oil extraction. Because of the low temperature nutrition in the oil and press meal is perfectly preserved. 

PreHeater Commodity Heater fits into oil press inlet for heating feed stock prior to pressing.

Centrifuge Oil Cleaner, polishes oil down to as low as .01 of a Micron. 

Quantities

The Model 70 oil press will produce 50 to 70 gallons (190 to 260 Liters) of cold pressed oil per day running 24 hrs from oil seed crops and nuts. The press will process 700 to 1500 lbs (320 to 680 Kilograms) of oil seed or nuts per day providing 450 to 900 lbs (200 to 400 Kilograms) of high protein, high nutrition low fat press meal.

Soybeans typically contain 18% oil by volume. Because of the low oil content in soybeans, you will get 15 to 20 gallons (56 to 75 Liters) of oil and 600 to 800 lbs (270 to 360 Kilograms) of high protein press meal per day running 24 hours.

If you are seeking greater processing volumes, we simply line them up in a row, as many as needed, to produce your achievements. Much like an engine, which is better, one large piston/cylinder or several pistons/cylinders?

Continuous Operation

The Model 70 Oil Extractor Press is engineered to be set up and ran continuously 24 hours a day without any other intervention. As long as clean commodity is automatically feeding to the press, the machine will run without cease.

The press requires 240V single phase input and draws only 4-6 amps under normal operation. Three phase power can also be used to power the press if it is available.

The press motor has a variable speed controller to accurately set the rate at which the press runs. The slower you run the machine, the more oil will be extracted.

CP-4 Commodity Cleaner, 4 port: All Stainless Steel Seed Cleaner, Hopper, Chassis .00

CP-4SD Screen drawer for seed cleaner .00

CP-GS 110V Grain Switch mounts in bin to automate auger on/off

MCTR Meal Cutter, gear motor with propeller blade 0.00

Duane Brindle       *       VAL-TEC, LLC       *       877-244-3769 (toll free)         *           fax: 866-597-1101 (toll free) 

        Send mail to val-tec@val-tec.com  with questions or comments about this web site.